How to Add or Remove Devices that Ray Controls

The first time you use Ray, Ray takes you through a step-by-step setup guide to connect all your devices. From time to time you will of course need to change your setup, as you change your equipment. All of this is done through Settings. Follow the steps below and you’ll be sitting back and watching TV again in no time!

1. From the home screen, tap the Settings icon.

2. Tap “Devices” in the Settings menu. 

3. This screen shows you all the devices you have connected to Ray.

To add a device: Tap "Add Device" and continue to Step 4.

To change or remove a device: tap on it and continue to Step 5.

4. Select the type of device you’d like to add and follow Ray’s prompts to continue setting up your new device.

Check out our Compatibility list to confirm which devices we support.

 

5. Swipe to the bottom of the screen until you see the “Change Device” or “Remove Device” button (this varies depending on the type of device). Tap on it and follow Ray's prompts.

 

For more detailed step-by-step guides, take a look at these setup articles:

Connecting with Your Soundbar

Connecting with Your A/V Receiver

Connecting with Your Xbox, Roku, or Apple TV

Connecting with Your Media Player

Connecting with Your DVD or Blu-ray Player

Connecting with your Television

Connecting with your Set-top Box

Connecting with Your DISH Hopper or Joey 

Connecting with Your Wi-Fi-Enabled DIRECTV Receiver

Have more questions? Contact us